Current Version
|
The current program version is available for customers with a
guarantee or maintenance contract at
Service.
A brief description of the most important new features can be
found at
'New Features in InfoCAD'. |
10.2 (May 10)
|
The EN 1992-1-1 checks have been added to the 'Axisymmetric
Shells' module. This version
requires at least Windows XP. |
|
|
10.1 (May 10)
|
Load cases and the load case combinations can now be renumbered
in groups. |
|
|
10 (March 10)
|
 |
The new InfoCAD Version 10 CD,
together with a brief description has been delivered
to all customers with warranty or service contract. |
A brief description of the most
important new features can be found at 'New
Features in InfoCAD'. Also available as
PDF file.
(Right-click the PDF file to
download.) |
|
|
|
8.30 (Jan
10)
|
The Bridge Checks according to EN
1992-2 and OENORM B 1992-2 have been added. In
the fatigue combination according to DIN Technical Report
and DIN 1045-1 the cyclic and non-cyclic actions are
superposed separately now.
In existing projects the previous
fatigue action has to be exchanged with the new fatigue
action Qfat. |
|
|
8.20 (Sept
09)
|
 |
The new user interface allows
personal menue and toolbar settings. Thumbnail
pictures provides an easy overview of your project
files in the windows explorer. |
|
|
|
8.11 (May
09)
|
 |
In order to allow structured
representations, you can now use so-called partial
views. Thereby representations are possible which
cannot be achieved by use of the layer technique. |
|
 |
Within cavities of cross-sections,
heat transfer by radiation and convection can be
considered now. |
|
|
|
8.01 (Feb
09)
|
 |
The function 'Predeformation' has
been extended with a method to define sinusoidal
precurvatures. The IFC data transfer has been
extended. |
|
|
|
8.0 (Dec 08)
|
 |
The new InfoCAD Version 8.0 CD,
together with a new manual has been delivered to all
customers with warranty or service contract. |
A brief description of the most
important new features can be found at 'New
Features in InfoCAD'. Also available as
PDF file.
(Right-click the PDF file to
download.) |
|
|
|
7.07
(October 08)
|
The design for Reinforced and Prestressed Concrete Structures
according to
SS
EN 1992-1-1:2005 with the Sweden National Annex 2008
has been added. |
|
|
7.06 (August
08)
|
The license manager can manage different license variants on a
single server. Line support reactions can be
labeled with their integral and the labeling of line loads and line
support reactions has been improved. |
|
|
7.04 (May
08)
|
Considering the specific national regulations, the following checks
for reinforced and prestressed concrete structures have been added: |
|
|
7.03 (April
08)
|
The Design for Reinforced and
Prestressed Concrete Structures according to EN 1992-1-1:2004
has been added.
The check of principal tensiles stresses according to DIN TR 102 can
be limited to the zone of longitudinal compressive stresses. |
|
|
7.01 (March
08)
|
 |
The hidden mode is completely
revised. A new 'cross-section representation' has
been added. This enables a photorealistic
representation according to the system viewer. |
|
|
|
7.0 (13 Dec
07)
|
 |
The new InfoCAD Version 7.0 CD,
together with a brief description has been delivered
to all customers with warranty or service contract. |
A brief description of the most
important new features can be found at 'New
Features in InfoCAD'. Also available as
PDF file.
(Right-click the PDF file to
download.) |
|
|
|
6.56 (5 Nov
07)
|
The program capacity has been increased to 1 million nodes
and elements. Depending on the size of the systems of
equations it may be necessary to use the 64-bit program
version in conjunction with the parallel sparse solver or
the iterative equation solver. The processing of
geometrically defined point loads, line loads and area loads
has been optimized resulting in a considerable increase of
speed. |
|
|
6.54 (28
June 07)
|
 |
The new
spring elements
allow users to realize numerous nonlinear effects,
such as slip, contact, etc. |
The simultaneous display of several load cases simplifies
inspection and handling. |
|
|
6.52 (14 May
07)
|
The current program version features substantial extensions
and improvements. |
|
|
